Location: /Electric Fencing/Gates & Handles

Thunderbird No 34B 3 Way Gate Anchor

Product Information

Gate anchors are normall screwed onto a wooden post to connect gate handles.  The gate handle clicks into one of the holes and you tie your hot tape or braid through another of the 3 holes.  It's the fastest and neatest way for creating a gateway.

They can be converted for use on star posts by swapping the supplied insulator with the No 18S steel post insulator.  We're happy to do that for you - just let us know.

Now while you can use these to carry the electrical current through the gate handle and off to the rest of the fence - where they're really good is where you run underground cable under your gate, you can connect the cable to this as well with the supplied stainless bolt and nut.  That way, when you disconnect the gate handle from the anchor, you haven't disabled all your fencing - only the gate.  Clever.  Of course you can always be even cleverer by installing a cut out switch instead - but they're dearer and if you're doing a few gates in close succession, you really don't need a cut out swith every 50 metres!

 

Price: $5.30 $4.95

Product Code: 26

 

Quantity:

	Bookmark this Page			Tell a Friend
	Print This Page			Write a product review
	Home Page			Contact Us

Enter your product review here

Please enter your name:
Please rate the product quality:	-- Please select -- Poor OK Good Very Good Excellent
Please rate the product price:	-- Please select -- Expensive OK Good value Great value Super cheap!
Please rate the product overall:	-- Please select -- Below average Average Good Very good Superb
Please enter your comments: (Maximum characters: 500)  You have characters left.